Portable Belt Sander Safety Rules for Woodworking and Your Woodshop

• Disconnect the power before changing abrasive belts.
• Never attempt to sand with a torn or loose abrasive.
• Always make sure the switch is off before plugging in the power cord
• When replacing a belt, first check the direction of the arrow on the inside of the belt to determine which direction the belt should turn.
• Use the belt tracking adjustment to align the abrasive belt. This procedure must be performed while the sander is turned on.
• Be sure the stock is securely clamped before attempting to sand.
• During the sanding operation, keep both hands on the sander.
• Keep your fingers away from the abrasive belt when it is rotating.
• The sander should reach full speed before attempting to sand.
• Do not force the sander into the stock. Use only a light, consistent pressure at all times.
• Always lift the sander from the stock before turning it off.
• Wait until the sander comes to a full stop before setting it on the work bench.

Navigate: Lee's Wood Projects > Woodshop & Woodworking Safety Rules > Portable Belt Sander Safety Rules